; WINKFPT.TXT [VERSION] Version=5.3.1 [ERROR] 1=CoapiKfInit: Initialization error! 2=Memory error 3=SetEvent-Overflow 4=Write file 5=Flow: FLOW_INFO_ERROR 6=Directory could not be determined 7=File not found 8=ECU-Directory not found (see EDIABAS.INI) 9=Cannot open Directory 10=Too many instances! 11=File %s could not be copied. 12=COAPI Error text file "coapierr." not found 13=COAPI Error text file %s has no Version 14=COAPI Error text file %s has Version %s, COAPI Version is %s 15=The following files may only appear in directory ..\EDIABAS\bin and must be deleted: 16=Error on switching the language 17=Error on refreshing (converting again) the common data files 18=Error on setting the working directories from "winkfpt.ini"! The default setting is used! 19=Error on setting the working directories! The last setting is used! 100=P-SGBD needs ECU-Address 100b=Enter ECU-Address first 101=Vehicle identification number not existent SGADRESS_ERROR1=ECE-Adress error 102=2 digits (Hexadecimal) needed 103=Only hex digits 104=Wrong ECU-Address: %s 105=Error on determining the current assembly identification number 105b=Check HIS-File: 106=Error on setting ECU-Adress. 106b=Please check: Interface, PABD, P-SGBD 107=VIN error ZUSB_ERROR1=ZUSB error 108=7 digits necessary 109=Only digits 110=Error on converting the GDATEN logistic files !! 111=Import not possible - Assembly file (xxx.dat) is missing !! 112=ECU internal temperature is not supportted 113=Batch control file is already used by another WinKFPT32-Instance: HWNR_ERROR2=Wrong ECU hardware number: %s HWNR_ERROR4=Check hardware number HWNR_ERROR5=Check historie.bsu + Configuration 200=Error on reading HW-Number from ECU or logistic file 200b=Please check: Connection of ECU, Diagnosis line, ECU-Address, Logstic files 201=(BSU not possible) 202=(BSU not possible, because historie.bsu is missing) 203=(BSU not possible, bevause historie.bsu erroneous) 204=BSU is possible, but not activated!! 205=Check hardware reference 205b=Hardware reference could not be read from ECU 206=The user information field is full 207=Programming order could not be determined! 208=List of files to flash does not decrease 208b=Endless loop in programming suspected 209=UIF can not be read! 210=BSU error! 211=Error on flash programming! 212=Error on checking data consitency -> 212b=in program datafile (PAF) 212c=in data datafile (DAF) 300=First HW interface could not be initialized! 301=HW interface could not be initialized! 302=HW interface could not be occupied! 303=HW interface is already used by another WinKFPT32-Instance! 304=New HW interface could not be occupied! 400=Invalid parameter for WITH_MOSTFIREWALL: 400b=Only ON/OFF permitted 401=Invalid parameter for TESTER_ID: 401b=Only hexdigits permitted 500=Wrong ECU identifier 501=Wrong project 502=Wrong project variant 503=Wrong program version 600=Diagnosis: Error on reading ECU identification 600b=Error on reading physical hardware numbmer 601=Diagnosis: Error on reading ECU internal temperature 602=Diagnosis: Error on reading the data reference 603=Diagnosis: Error on reading the hardware reference 604=Diagnosis: Error on reading the ZIF (Supplier Info Field) 605=Diagnosis: Error on reading the ZIF Backup (Supplier Info Feld - Backup) 606=Diagnosis: Error on reading the ECU programming status 650=Special: Error on reading the UIF 651=Special: Error on reading the ECU baudrate 652=Special: Error on reading the calibration values 653=Special: Error on writing the calibration values 654=Special: Error on setting the VS20-Mode 655=Special: Error on setting the DS2-Mode 700=Logistic file could not be converted from binary to ASCII! 700b=HW history 700c=assembly file 700d=assembly history 701=Error on determining compatible HW numbers! 701b=-> check HW history resp. assembly historie 702=Error ECU member 702b=Please check the syntax of Index/Address: 703=Error in logistic file 704=Error on determining the ZB number! 704b=Check assembly file 705=Error on determining the HW and SW number from ZB file 706=Error on determining the diagnosis protokoll from "prgifsel.dat" 800=Error on creating a list 800b=of an assembly line data set (WDP) 801=Error on deleting assembly line data set(s) (WDP) 802=Error on export of a configuration of development files 803=Error on export of a configuration of assembly line data files 804=Error on re-import of a configuration of development files 805=Error on re-import of a configuration of assembly line data files 806=Error on import of assembly line data set(s) NO_CABDPAR=No CABD-Par ERROR=Error [DIALOG] OK=OK ABBRECHEN=Cancel ENTFERNEN=Remove ALLE_ENTFERNEN=Remove all ECU=ECU PSGBD=P-SGBD PABD=PABD AIF_INFO=UIF-Info EXPORT=Export AIF_X_TIMES_PROG=The user info field can still be programmed %d times PROG_SG=Program ECU? MULTIPLE_END=Multiple programming finished MULTIPLE_UPDATE_END=Multiple ZUSB-Update programming finished UPDATE_OK=ZUSB-Update programming OK PROG_OK=Programming OK BSU_OK=Bootsectorupdate OK PROG_PROG_OK=Program programming OK DAT_PROG_OK=Data programming OK PROG_NOT_POSSIBLE=Programming not possible! BSU_NOT_ACTIVE=Bootsectorupdate is not active! SELECT_INTERFACE=Please choose interface before batch mode! NO_FILE=No file found INTERN_ADRESS=P-SGBD uses internal Address NO_INTERFACE= IMPORT=Import LOAD_LAST_KONF=Load last configuration? SAVE_KONF=Save current configuration? SAVE_KONF2=Save configuration in Ini file? IMPORT_DATA=Import assembly line data files ERROR_LOG_PATH=Directory for Error.log file DEVELOP_EXP_PATH=Base directory for export of development files WDP_EXP_PATH=Base directory for export of assembly line data files BASE_WORK_PATH=Base directory for working directories of WinKFPT NO_ERROR_LOG_PATH=Directory for Error.log file does not exist NO_DEVELOP_EXP_PATH=Base directory export of development files does not exist YES_DEVELOP_EXP_PATH=Directory for export of development files already exists NO_WDP_EXP_PATH=Base directoty for export of assembly line data files does not exist YES_WDP_EXP_PATH=Base directoty for export of assembly line data files already exists NO_BASE_WORK_PATH=Base directoty for working directories of WinKFPT does not exist NO_VALID_PATH=Directory name is invalid! NO_CREATE_PATH=Directory "%s" can not be created! ENTER_SGADR=Enter ECU address FILE_WITHOUT_EXT=Specify filename without extension! INFO_SWITCH_TO_KOMFORT1=You are about to enter the comfort mode, but INFO_SWITCH_TO_KOMFORT2=IPS is still set as PADB format. If you INFO_SWITCH_TO_KOMFORT3=proceed, the format will be set to IPO. INFO_UPDATE1=ECU -> ZBNr. from UIF: INFO_UPDATE2=Update -> current ZBNr.: INFO_UPDATE3=Program current ZBNr.? INFO_UPDATE4=Result - Assembly identification number update DISP_DATEN=Data file: DISP_PROG=Program file: DISP_NAAB=NAAB file: FROM_COAPI_INI=from DISP_DIAG_PROT=Diagnosis protocol: DISP_HW_INTERFACE=HW interface: DISP_UNIT=Unit: DISP_UPROG=Programming voltage FILE_EXISTS=File %s already exists! OVERWRITE_FILE=Overwrite file? WIN_IMPORT=WINKFPTool - Import INFO_SWITCH_TO_EXPERT1=The expert mode configuration contains a PABD in IPO format, INFO_SWITCH_TO_EXPERT2=but currently IPS is still set. Switch to IPO? INFO_SWITCH_TO_EXPERT3=The expert mode configuration contains a PABD in IPS format, INFO_SWITCH_TO_EXPERT4=but currently IPO is still set. Switch to IPS? INFO_SWITCH_TO_IPS1=You choosed the PABD format IPS, INFO_SWITCH_TO_IPS2=but an IPO file is already selected. INFO_SWITCH_TO_IPS3=Really use IPS? INFO_SWITCH_TO_IPS4=The PABD format IPS is used. INFO_SWITCH_TO_IPS5=To communication with the ECU, you must INFO_SWITCH_TO_IPS6=choose a new PABD in expert mode next. INFO_SWITCH_TO_IPO1=You choosed the PADB format IPO, INFO_SWITCH_TO_IPO2=but an IPS file is already selected. INFO_SWITCH_TO_IPO3=Really use IPO? INFO_SWITCH_TO_IPO4=The PABD format IPO is used. INFO_SWITCH_TO_IPO5=To communication with the ECU, you must INFO_SWITCH_TO_IPO6=choose a new PABD in expert mode next or INFO_SWITCH_TO_IPO7=start the comfort mode and implicitly choose INFO_SWITCH_TO_IPO8=a PABD by selecting a ZB number. IMPORT_FLASH_DATA=Import Data/Program/BSU NAAB Files IMPORT_SGBD=Import PSGBD IMPORT_PABD=Import PABD (Flash sequence description file) DIR_EXISTS=Directory %s already exists! DEL_REWRITE_DIR=Delete and re-write directory? DIR_EXISTS_NOT=Directory %s does not exist! DIR_CREATE=Create directory %s? FILE_EXISTS2=Abort! A file with the name of the target directory exists: %s ! PLEASE_CHECK=Please check ! JOB_OK=Job OK! ERR_CODE=Code ERR_LEVEL=Level ERR_MODUL=Module ERR_PROC=Procedure ERR_TEXT=Text ERR_INDEX=Index START_COMPILER=Starting compile mode COMPILER_ERR_FILE=Error in file FILE=File COMPILE_SUCCEED=compiled without error NOT_IMPLEMENTED=The function is not implementet at the moment! WARNING_NO_SG_REFERENZ=Warning! Reference could not be read from ECU KOMP_DATEN_PROGRAM=Compatibility between data and program can not be determined!! KOMP_PROGRAM_HARDWARE=Compatibility between program and hardware con not be determined!! WINKFP_COAPI_FEHLER=Error EDIABAS_PATH=Attention!! EDIABAS-Path must be entered in Windowspath (PATH)! CHECK_SYSTEM_PATH=Check environment variable "PATH" in system settings - System WDP_LOESCHEN=Delete assembly line data files WDP_ALLE_LOESCHEN=Delete all shown assembly line data? WDP_SEL_LOESCHEN=Delete all selected assembly line data? COMMON_LEER=The COMMON files HWNR.DA2, KFCONFXX.DA2 and SWTCONFx.DAT will be emptied completely! COMMON_KORR=Corresponding entries will be removed from the COMMON files HWNR.DA2, KFCONFXX.DA2 and SWTCONFx.DAT! WDP_WAEHLEN=There is no assembly line data selected! WDP_NICHT_VORHANDEN=There is no valid assembly line data present! EXP_KONF_DEVELOP=Export -> Configuration - Development data EXP_KONF_WDP=Export -> Configuration - Assembly line data EXP_BAS_DIR=Export - Base directory: IMP_KONF_DEVELOP=Import -> Configuration - Development data IMP_KONF_WDP=Import -> Configuration - Assembly line data WDP_KONFLIKT_TITLE=Import assembly line data sets WDP_KONFLIKT_T1=WDP-Conflict! WDP_KONFLIKT_T2=The following WDPs are already present: WDP_IMPORT=Import WDP_REPLACE=Replace WDP_MERGE=Merge KONF_NAME=Configuration name: BAUREIHE=Type series: I_STUFE=I-Level: WERKSDATEN=Assembly line data (ECU families): EXP_DEV_DATA=Export - Development data EXP_TOOLREL_DATA=Export - Tool relevant data IMP_DEVELOP_DATA=Import - Development data IMP_TOOLREL_DATA=Import - Tool relevant data INVALID_KONF_NAME=Configuration name "%s" is invalid! INVALID_BAUREIHE=Type series "%s" is invalid! INVALID_I_STUFE=I-Level "%s" is invalid! INVALID_EXP_PATH=Export directory "%s" is invalid! NO_EXPORT=Export not possible! EXIST_BASE_PATH=Check Configuration setting of the base directory "%s" an user entry "%s" OVERWRITE_DIR=Really overwrite directory "%s"? MIT_ENTWICKLUNGSDATEIEN=With development data OHNE_ENTWICKLUNGSDATEIEN=Without development data MIT_TOOLRELEVANTE_DATEN=With tool relevant data OHNE_TOOLRELEVANTE_DATEN=Without tool relevant data AKTIVIERT=ACTIVATED NICHT_AKTIVIERT=NOT ACTIVATED FILTER_DATPROG=All (*.paf;*.0pa;*.daf;*.0da;*.baf;*.0ba)|*.paf;*.0pa;*.daf;*.0da;*.baf;*.0ba;*.pbf;*.0pb;*.dbf;*.0db;*.bbf;*.0bb|Progams (*.paf;*.0pa)|*.paf;*.0pa;*.pbf;*.0pb|Data (*.daf;*.0da)|*.daf;*.0da;*.dbf;*.0db|BSU NAAB files(*.baf;*.0ba)|*.baf;*.0ba;*.bbf;*.0bb|| FILTER_PSGBD=ECU description files (*.prg)|*.prg|| FILTER_PABD=IPS- and IPO files (*.ips;*.ipo;)|*.ips;*.ipo|IPS files (*.ips)|*.ips|IPO files (*.ipo)|*.ipo|| AIF_ENTRIES=Entries of the user info field: ENTRY=Entry FG_NR=Vehicle identification number DATUM=Date AENDERUNGS_INDEX=Change index SW_NR=Software number BEHOERDEN_NR=Office number ZB_NR=Assembly identification number SERIEN_NR=Seral number PROG_NR=Program number KM=Kilometer HAENDLER_NR=Dealer number ENDE_AIF=End of user info field POSS_BAUD=Possible Baudrates BAUDRATE=Baudrate ENDE_BAUD=End of baudrate table DATAREF_ENTRIES=Entries of data reference HWREF_ENTRIES=Entries of HW reference ZIF_ENTRIES=Entries of ZIF ZIF_BACKUP_ENTRIES=Entries of ZIF-Backup IDENT_ENTRIES=Entries of ECU identification TEMP_ENTRIES=Entries of ECU internal temperature SG_KENNUNG=ECU identifier PROJEKT=Project PROGRAMMSTAND=Program version DATENSATZ=Data version STATUS=Status BMW_HW_NR=BMW hardware number BMW_PROGRAMMSTAND=BMW program version BMW_TEILENR=BMW part number CODIER_INDEX=Coding index DIAG_INDEX=Diagnosis index VARIANTEN_INDEX=Variant index HERSTELLDATUM=Manufacturing date (DD.MM.YYYY) LIEFERANT_NR=Supplier number LIEFERANT=Supplier SW_NR_1=Software number (message catalogue version) SW_NR_2=Software number (functional software version) SW_NR_3=Software number (operating system version) SW_NR_4=Software number (reserved - currently unused) PHYS_HW_NR=Physical Hardware number SG_INNENTEMP=internal ECU temperature GRAD_C=degrees C MENU_DATEI=&File MENU_ANZEIGE=&Display MENU_IMPORT_EXPORT=&Import/Export MENU_KOMMUNIKATION=&Communication MENU_KONFIGURATION=C&onfiguration MENU_HILFE=&Help MENU_EXIT=&Exit MENU_CABIERR=&CABI.ERR MENU_ERRORLOG=&ERROR.LOG MENU_PABD_PARAMETER=PABD-&Parameter MENU_HW_HISTORIE=&HW history MENU_ZB_HISTORIE=Z&B history MENU_ZB_VORSCHRIFT=&ZB rule MENU_API_TRACEDATEI=&API trace file MENU_IFH_TRACEDATEI=&IFH trace file MENU_BATCH_MODUS=Batch &mode MENU_IMPORT=&Import MENU_WERKSDATEN_IMPORT_EXP_KONF=Exported configuration - assembly &line data MENU_ENTWICKLUNGSDATEN_IMPORT_EXP_KONF=Exported configuration - de&velopment data MENU_WERKSDATEN_IMPORT=&Assembly line data MENU_DAT_PROG_IMPORT=&Data / Program / BSU NAAB files MENU_PSGBD_IMPORT=P-&SGBD MENU_PABD_IMPORT=P&ABD MENU_EXPORT=&Export MENU_WERKSDATEN_KONF_EXPORT=Configuration - assembly &line data MENU_ENTWICKLUNGSDATEN_KONF_EXPORT=Configuration - de&velopment data MENU_LOESCHEN_WD=&Delete - assembly line data MENU_HW_INTERFACE=HW &interface MENU_DIAGPROT=Diagnosis &protocol MENU_INHALT=&Content MENU_INFO=Inf&o... MAINFRM_TEXT_SG_ADR=ECU address/integration position: MAINFRM_TEXT_FG=Vehicle identification number : MAINFRM_TEXT_ZUSB=Assembly identification number : MAINFRM_TEXT_HW=Hardware number : MAINFRM_BSU_STATUS=Bootsectorupdate TITLE_KONFIGURATION="Ini Options" KONF_PROGRAMMIERSPANNUNG_ANZEIGEN=Show programming voltage KONF_SCHNELLE_BAUDRATE=Fast baudrate KONF_TEST_CHECKSUMME=Test Checksum KONF_PROGPROG_ERZWINGEN=Force program programming in comfort mode KONF_BSU_AKTIVIEREN=activate Bootsectorupdate KONF_AIF_SCHREIBEN_DATEN=UIF write after data KONF_AIF_SCHREIBEN_PROG=UIF write after program KONF_AIF_SCHREIBEN_EXP=UIF write in expert mode KONF_AIF_SCHREIBEN_KONF=UIF write in comfort mode KONF_PABD_FORMAT=PABD format KONF_API_TRACELEVEL=API tracelevel KONF_IFH_TRACELEVEL=IFH tracelevel KONF_DIR_ERRORLOG=Directory for error file "error.log" KONF_DIR_ENTW=Base directory for exported configurations - development data KONF_DIR_WERKSDATEN=Base directory for exported configurations - assembly line data KONF_BASIS_WORKDIR=Base directory for working directories of WinKFPT TITLE_BATCH=WinKFPt Batch mode monitor BATCH_CONTROLFILE=Control file: BATCH_STATUS=Status: BATCH_FEHLER=Errors: BATCH_ABBRUECHE=Aborts: BATCH_TARGET_IF=Target interface: BATCH_MODE=Mode: BATCH_START=Start BATCH_STOP=Stop BATCH_DIALOG_ENDE=Close dialog BATCH_NO_CONTROLFILE_TEXT=no control file specified BATCH_TEXT_STARTED=started BATCH_TEXT_READING=reading control file BATCH_TEXT_RUNNING=programming active BATCH_TEXT_SLEEPING=wait for control file BATCH_TEXT_PROGRAMMING=wait for end of programming BATCH_TEXT_PROGRAMMING_FINISHED=programming ended BATCH_WAIT_TO_STOP=wait for end of batch mode BATCH_TEXT_STOPPED=not started TITLE_DIAGPROT=Choose diagnosis protocol TITLE_KONFEXP=Configuration - expert mode KONFEXP_HEADER=Configuration settings - expert mode: KONFEXP_SGADR=ECU-Address: KONFEXP_DATFILE=Data file: KONFEXP_PROGFILE=Program file: KONFEXP_BSUFILE=BSU NAAB file: TITLE_FGENTRY=Enter vehicle identification number FGENTRY_FG=VIN: FGENTRY_CS_CHECK=calculate checksumme TITLE_HWIF=Choose HW interface TITLE_LISTBOX=Choose TITLE_SG_ADR_EINGABE=Enter ECU-Address SG_ADR=ECU-Address SG_ADR_WERTEBEREICH=Range: 00 - FF hexadecimal TITLE_SHOWERR=COAPI-Error SHOWERR_NORMAL=Normal view SHOWERR_ERWEITERT=Extended view SHOWERR_COAPILIST=COAPI error entries: TITLE_SHOWFILE=Show file content TITLE_ZUSB_EING=Enter ZUSB ZUSB_EING_ZUSB=ZUSB: TITLE_ZUSB_AUS=Choose assembly identification number / integration position ZUSB_AUS_SGFAM=ECU familiy: ZUSB_AUS_NR=ZB-Number: ZUSB_AUS_VERBAUORT=Integration position: Konfiguration=Configuration Konfiguration speichern?=Save Configuration? Testmodus auswaehlen...=Select Testmode... Einzeln,Auswahl,Skript=Single,Selection,Script Funktion auswaehlen...=Select Function... Skript speichern?=Save Script? Skript ausfuehren?=Run Script? Start HDDownload?=Start HDDownload? SGBM-ID auswaehlen...=Select SGBM-ID ... [BATCH] MODE_KOMFORT=Comfort mode MODE_EXPERT=Expert mode MODE_NOT_DEFINED=not defined PROG_IO=Programming ok PROG_NIO=Programming not ok. Abort PROG_FATAL=Programming not ok. Fatal Error FGNR_SET=Vehicle identification number was set ERROR_ACTIVATE_INTERFACE=Error: HW interface could not be activated! ERROR_NO_INTERFACE=Error: No HW interface present! INTERFACE_ACTIVATE=HW interface activted. ERROR_NO_PABD=Error: No PABD specified! ERROR_PABD_IPS_NEEDED=Error: PABD has wrong format: IPS needed! ERROR_PABD_IPO_NEEDED=Error: PABD has wrong format: IPO needed! ERROR_PABD_NOT_FOUND=Error: PABD not found! PABD_SET=PABD set. ERROR_NO_SGBD=Error: No P-SGBD specified! ERROR_SGDB_NOT_FOUND=Error: P-SGBD not found! SGBD_SET=P-SGBD set. ERROR_SET_SG_ADRESS=Error: ECU-Address could not be set! SG_ADRESS_SET=ECU-Address set. USE_INTERNAL_ADRESS=Internal ECU-Address will be used. ERROR_SG_NEEDS_ADRESS=Error: P-SGBD needs ECU-Address! ERROR_SET_PROTOKOLL=Error: Diagnosis protocol could not be set! PROTOKOLL_SET=Diagnosis protocol set. ERROR_NEED_DATA=Error: NAAB, program or data file needed! ERROR_DATA_FILE_NOT_FOUND=Error: Data file not found! ERROR_PROG_FILE_NOT_FOUND=Error: Program file not found! ERROR_NAAB_FILE_NOT_FOUND=Error: NAAB file not found! DATA_SET=Data and/or program and/or NAAB file set. NAAB_PROG=BSU activated! - NAAB will be programmed NAAB_NOT_PROG=BSU not activated! - NAAB was not programmed. PROG_PROG=Program will be programmed. DATA_PROG=Data will be programmed. UNKNOWN_BATCH_TYPE=Error: Batch file type unknown. BATCH_END=Batch mode ended NO_ZB_NR=Found no ZB-Numbers in control file [FKEYS] Komfort_Modus=Comfort Experten_Modus=Expert PABD=PABD P_SGBD=P-SGBD SG_Adresse=ECU Address Datendatei=Data file Programmdatei=Program file NAAB_Datei=NAAB file FGNR_eingeben=Enter VIN Fertig=Done ZUSB_eingeben=Identify ECU family ZUSB_auswählen=Choose Custom File ZUSB_update=Update ECU Prog_NAAB=Prog. NAAB Prog_Programm=Prog. Program Prog_Daten=Prog. Data Programmieren=Program Prog_ZBUpdate=Prog. ZB-Update Spezial=Special Diagnose=Diagnosis Zurück=Back AIF_lesen=Read UIF SG_Baudraten=ECU baudrates Abgleichwerte=Calibration values VS20_DS2_Mode=VS20/DS2-Mode EWS_Abgleich=EWS-Alignment VS20_Mode=VS20-Mode DS2_Mode=DS2-Mode Abgl_lesen=Read Calib. Abgl_schreiben=Write Calib. SG_Status=ECU Status SG_Ident=ECU Ident SG_Innentemp=ECU intern. Temp.